Joint sealing is a process that seals the joint between two pieces of concrete pavement. The joint sealant fills in gaps or cracks, preventing moisture from seeping into the joint and causing damage to the underlying materials. When it comes to joint sealing, there are many things you need to take into consideration if you want your project to be successful.
Here are six steps for attaining the perfect joint sealing results!
The preparation phase should include removing debris from the joint seal area with a broom or leaf blower. If there are any loose stones in the joint, they should be removed before proceeding with joint sealer application.
2. Joint Sealing Material Application
When applying joint sealant material, make sure to use the appropriate tools to apply the sealant to the joint in a smooth, even motion. Make sure that the joint sealant is applied correctly to prevent any leaks.
3. Joint Sealant Curing
The joint sealant should be allowed to dry for a minimum of 24 hours before traffic is redirected over the joint. If joint sealant is applied to the joint, but traffic is allowed over it before 24 hours have passed, severe damage may be caused.
4. Joint Sealant Re-Application
If joint sealant material has been applied to the joint but does not adhere appropriately over time, it may be necessary for you to apply the joint sealant again. This process is possible by removing the loose joint sealant and sanding down chips until the surface is smooth again.
5. Joint Sealant Curing
Once the joint sealant has been re-applied, it must cure properly to ensure the joint remains watertight. Allow the joint sealant to cure for a few days before traffic can be allowed over them again.
6. Joint Sealant Retest
After applying the joint sealant, you should wait a few days before retesting to ensure it is dry and ready for traffic. If the joint sealant appears wet after a couple of days or there is any water penetration from the concrete pavement into joints, then you may need to redo the entire process.
The Final Word
There are many benefits to joint sealing, including the prevention of water infiltration and potential problems with future concrete repairs.
If you’re looking for a company that can help seal your concrete joints in Garden City or the surrounding areas, give Sweeney’s Pavement Maintenance, LLC a call today! We offer expert joint sealing services at competitive rates; we also provide dependable warranties on all work performed by our team.
Schedule an appointment with us now before it gets too late. We know how important this is for both safety reasons as well as aesthetics. Trust Sweeney’s Pavement Maintenance, LLC to seal your concrete joints right the first time around!