The Top 5 Mistakes To Avoid When Sealcoating Your Pavement

The Top 5 Mistakes To Avoid When Sealcoating Your Pavement

If you’re sealcoating your asphalt pavement on your own, there are a few mistakes you’ll want to avoid. Sealcoating is a tricky process, and if it’s not done correctly, you could end up with an expensive mess on your hands. This blog post by Sweeney’s Pavement Maintenance LLC will discusses the top five mistakes people make when sealcoating their driveway.

Not Using Enough Sealer

If you’re sealcoating your driveway, the first mistake you’ll want to avoid is not using enough sealer. It’s important to use a thick layer of sealer to protect your pavement properly. If you don’t use enough sealer, your pavement will be more susceptible to damage from the elements.

Uneven Sealer Application

Another mistake you might make is not applying the sealer evenly. When applying the sealer, be sure to put on an even layer. It will also take a long time to dry and could result in an uneven finish if you apply it too thick.

Not Applying it in the Right Weather

If you want your sealer to last, you need to apply it under the right conditions. If it’s too hot or humid, the sealer will dry too quickly and won’t have time to adhere to the pavement properly. Also, if it’s too cold, the sealer won’t dry at all and will just be a waste of money.

Applying Sealer On a Dirty Surface

Another common mistake is applying sealer to a surface that isn’t clean. Before applying the sealer, be sure to power wash your pavement and remove any dirt, debris, or oil stains. If you don’t clean your pavement first, the sealer won’t adhere properly and will start to peel off soon after it’s applied.


If you’re sealcoating your driveway, you need to ensure you have the right equipment. You’ll need a sealer applicator, a squeegee, and a broom. You might also need a power washer, depending on the condition of your pavement.

Some Tips On Applying Sealcoats

  • Make sure the temperature is right. The seal coat won’t adhere to the pavement properly if it’s too cold or too hot outside.
  • Don’t apply the seal coat too thick.
  • Use a squeegee, not a sprayer, to apply the sealer.
  • Be sure to seal coat the edges of your pavement and any cracks or holes.

You can carry out a successful DIY sealcoating job if you follow these tips! Just be sure to do your research and take your time, so you don’t make any mistakes.

Pavement maintenance needs to be done to keep your driveway or parking lot looking nice and functioning well. That’s where Sweeney’s Pavement Maintenance LLC serving Liberal comes in! We’re an asphalt paving company that can take care of crack sealing, sealcoating, and all your pavement maintenance needs.

We make the process seamless for you to rest easy, knowing your pavement is in good hands.

Contact us today for a free estimate!